Jewelry

Tutorial : Actual Flower and Resin Jewellery utilizing Wooden Frames and Shapes

Loading ....

Flowers nonetheless blooming away in your backyard?  Then you need to strive making some actual flower and resin jewellery designs. They’re widespread!

Utilizing wooden findings with actual pressed flower specimens can be a dynamic duo as each are natural!  So I attempted the mixture utilizing my wooden frames and shapes – they’re obtainable on my Etsy   – together with a number of new choices.  (Be aware : New !! free transport for all US orders over US$35. Flat fee transport for underneath $35.)

The overall methodology is not any totally different from when you use steel frames. I positioned the wooden frames on small items of Contact shelf liner which is barely adhesive. I firmly pressed these frames to attenuate any resin leakage.

Some suggestions embrace utilizing masking tape to safe the Contact liner onto some card inventory.  Putting the entire thing on a clipboard additionally makes it simpler to maneuver the work round. I used my favourite jewellery resin – Sensible Resin from Little Home windows . Readers can get a 15% low cost – use BG1516. 

I made up a batch and added a skinny layer of resin.


All the time cowl resin throughout curing to forestall mud from settling.  I often let every resin layer remedy in a single day.


The resin does seep out and covers the again body – that is not possible to keep away from because the wooden will not be fully flat, even after sanding.  If the resin protrudes from the sting, simply sand it off. You should utilize a tiny triangular file on the bail space to achieve the corners.

Discover that the shelving liner creates a frosted look which I like.  For those who want a transparent look, use a very good high quality packing tape.



I pressed flowers from my backyard utilizing my microwave press – see my tutorial on Methods to Press Flowers utilizing a Microwave.  All natural materials should be dry earlier than embedding into resin. In any other case the fabric will rot and go moldy.

Use both small flowers and leaves or petals or sections of larger flowers and leaves.



I additionally saved some pressings from final 12 months.  A number of the floral colours – particularly the pinks – won’t be as vivid as when you used the pressings as quickly as they’re dried.


You can too contact up with acrylic ink which is far more delicate than acrylic paint. My favourite and the one I used is  Daler Rowney’s Artist acrylic inks with pearlescent impact.   Let it dry earlier than continuing.


Some individuals use spray adhesive however I want a extra managed strategy when gluing delicate dried flowers onto the cured resin background. I simply use just a little Mod Podge to safe the blooms and leaves.

Resin does make flower petals go translucent. So I rigorously added extra Mod Podge over them as safety – with out spreading glue onto the background resin. Once more let this glue dry.

One benefit of utilizing Contact shelf liner is the frosted look camouflages any Mod Podge glue which could have gone past the flowers and leaves.



Another is to sandwich the pressings between clear tape or laminate the flowers as many do. I haven’t got a laminator so I can’t demo at the moment.  However what you do is laminate the pressed and dried flowers after which rigorously reduce round them. Add just a little extra resin into the items and slip these reduce outs into the resin. Then proceed to doming up with extra resin.

(I did strive the clear tape but it surely was tough coping with such stickiness.) Laminating is the way in which to go!



I added extra resin to cowl the flowers and leaves. In case you are cautious, you may simply dome up inside the body. However as a rule, I discovered that the resin did get onto the body so I simply went on so as to add resin on the wooden frames.  Including some tape beneath the bail holes is a good suggestion is you don’t need resin going into the holes – I had this downside with the wooden shapes.

Bear in mind to pop any bubbles with a toothpick earlier than masking up and curing.



You can too use wooden shapes quite than frames. I used Saman water primarily based wooden stain in walnut.  You can too use diluted acrylic paint for a washed look in different hues.  See my publish on Methods to Sand, Stain and Paint Laser Minimize Jewellery Designs for extra up to date particulars.


I experimented with utilizing a twig varnish to guard the flowers –  I nonetheless want Mod Podge because the varnish was too harsh on delicate petals.


I rescued these flowers with pearlescent acrylic ink!


One other tip – at all times glue down any petal or leaf!  In any other case the fabric will “poke” out by the resin coat.


Right here is the place I forgot so as to add some tape beneath the holes earlier than I added resin to the highest of the wooden shapes.  Add rigorously as you’re solely including a glass like end to the highest of the wooden.


This pair beneath is an instance of a foul seepage downside! One which you’ll be able to retrieve with some extra work.  File away the surplus resin!


However with the opposite wooden items, it was faster work to sand away the little little bit of resin which went to the again of the pendants. I then re-stained the wooden.  I additionally added a shiny varnish to finish the remedial work.


And do not forget to drill out the resin crammed holes!


What a distinction between pictures of simply the completed work alone in comparison with these with added floral accents with the jewellery!


Wooden pendants might be very gentle. So in order for you them to remain within the entrance AND not have the clasp slip all the way down to the entrance, join up the chain as beneath.


I missed a late creating bubble in the midst of this pressed clover flower beneath.  However I used to be in a position so as to add a flat again crystal throughout the remaining resin course of!








Images
I used my iPhone eight+ with the Digital camera+  app. I used  the Orangemonkie studio which comes outfitted with LED lights – for synthetic gentle images in my windowless basement studio. The Foldio2 is especially reasonably priced. I take advantage of the Foldio3 with the additional gentle bar as a result of I want the room and light-weight for tutorial images.  All remaining jewellery undertaking footage have been taken in pure gentle. Try my Methods to Photograph Jewellery Webinar join the notification so I can let when my on-line class is prepared.

Earlier than You Go

Disclosure This weblog might include affiliate hyperlinks. I do obtain a small charge for any merchandise bought by affiliate hyperlinks. This goes in the direction of the help of this weblog and to offer useful resource data to readers. The opinions expressed are solely my very own. They might be the identical whether or not or not I obtain any compensation.
 ______________________________
Authentic Publish by THE BEADING GEM
Jewellery Making Ideas – Wire JewelryTips  -Jewellery Enterprise Ideas 

 

Loading ....
Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Close